北京君光伟业科技有限公司

产品展示

联系我们

北京君光伟业科技有限公司

联系人：王经理

手机：0086 134 6668 6188

地址：北京市房山区辰光东路绿地启航国际三期9号楼403

邮编：102433

销售热线：4006-053-365

邮箱：jgwangguang@126.com

Beijing Junguang Weiye Technology Co., Ltd

Contact: Manager Wang
Mobile: 0086 134 6668 6188
Address: 403, Building 9, Greenland Qihang International Phase III, Chenguang East Road, Fangshan District, Beijing
Zip code: 102433
Sales Hotline: 4006-053-365

E-mail:jgwangguang@126.com

您所在的位置：网站首页 Home >产品展示

当前位置：产品展示>>产品展示>

喷淋系统[返回]

系统特点：

（1）控制系统可自由设定喷淋启动温度范围、喷淋时间、间隔时间，设置完成后环境温度达到设定温度，系统智能自启动程序。

（2）温感系统可手动调节至实际温度也可调节至指定温度。

（3）美国进口压力喷头，可实现一定压力下牛舍各端喷头喷水均匀，同启同止。

（4）采用水源过滤装置，解决因水质造成的喷头堵塞。

（5）温控系统达到温度临界自启动，根据不同温度现状选择采用不同程序。

（6）最多可设置4个暂停时间段，暂停时间不启动喷淋，避免奶牛去挤奶后出现喷水浪费。

（7）控制系统具有手动/自动两种模式，可在特定区域（如待挤厅）内进行手动喷淋。

（8）该喷淋系统中PLC采用日本产品，压力喷头采用美国进口产品、电磁阀和过滤器采用以色列进口产品。

System features:

The control system can freely set the spray start temperature range, spray time, and interval time. After the setting is completed, the environmental temperature reaches the set temperature, and the system intelligently starts the program.
The temperature sensing system can be manually adjusted to the actual temperature or to the specified temperature.
The pressure nozzle imported from the United States can achieve uniform water spraying at all ends of the cowshed under a certain pressure, with the same start and stop.
Using a water source filtration device to solve nozzle blockage caused by water quality.
The temperature control system reaches the critical temperature and starts automatically. Different programs are selected based on different temperature conditions.
Up to 4 pause time periods can be set, and the spray will not be activated during the pause time to avoid wasting water after cows go to milk.
The control system has two modes, manual/automatic, and can perform manual spraying in specific areas (such as crowded halls).
The PLC in this sprinkler system adopts Japanese products, the pressure nozzle adopts American imported products, and the solenoid valve and filter adopt Israeli imported products.

参数：

序号	组成部件	参数描述及计划来源
1	PLC控制器	主要组成部分：PLC、液晶屏、箱内降温系统、变压器等。系统分为自动模式和手动模式，自动模式下可依据不同温度环境，通过液晶屏可输入启动喷淋的温度段、喷淋时间、喷淋间隔等相关参数，设置完成，系统可自动监测温度运行喷淋程序；特殊情况下，根据生产工艺需要可手动操作强制喷淋（如在待挤厅安装的喷淋系统则需要手工操作更实用一些）。
1	PLC控制器
2	环境监测部分	主要组成部分：温度传感器、数据线等；JCJ100F系列温度变送器采用高精度线性放大电路，本温度变送器所采用用元器件均为高性能元件，不是一般产品所能比拟，敏感元件方面更是采用高精度进口pt100、Pt1000等铂电阻，使产品具有灵敏度高，稳定性好，准确度高和使用寿命长等优点。
3	过滤及主管线	主要组成部分：过滤网、ø75PE主管线、ø50PE主管线及配件等；PE主管线ø75壁厚6.8mm、ø50壁厚4.6mm,,1.6MPa，带坡度安装，冬季前排空管道水。
4	喷淋喷头部分	进口压力单向喷头，承受压力1.4KG/cm³；120度≥喷射角度≤150度；0米≥喷射半径≤1.9米；流量1.5-3.8L/min；
5	增压系统	主要含有加压泵、水罐、止回阀、电节点压力表控制箱等，管线压力及水流量不足时使用。

parameter:

No.	Components	Parameter Description and Plan Source
1	PLC controller	Main components: PLC, LCD screen, cooling system inside the box, transformer, etc. The system is divided into automatic mode and manual mode. In automatic mode, the temperature range, spraying time, spraying interval and other related parameters for starting spraying can be entered through the LCD screen according to different temperature environments. After setting, the system can automatically monitor the temperature and run the spraying program;
2	Environmental monitoring section	Main components: temperature sensors, data cables, etc; The JCJ100F series temperature transmitter adopts a high-precision linear amplification circuit. The components used in this temperature transmitter are all high-performance components, which cannot be compared with ordinary products. In terms of sensitive components, high-precision imported platinum resistors such as PT100 and Pt1000 are used, making the product highly sensitive, stable, accurate, and has a long service life.
3	Filter and Main Line	Main components: filter screen, ø 75PE main line, ø 50PE main line and accessories, etc; The PE main pipeline has a wall thickness of 6.8mm for ø 75 and 4.6mm for ø 50, with a pressure of 1.6MPa. It is installed with a slope and the pipeline water is drained before winter.
4	Spray nozzle section	Imported pressure unidirectional nozzle, capable of withstanding a pressure of 1.4KG/cm ³; 120 degrees ≥ spraying angle ≤ 150 degrees; 0 meters ≥ spraying radius ≤ 1.9 meters; Flow rate of 1.5-3.8L/min;
5	Boosting system	It mainly includes a booster pump, water tank, check valve, electric node pressure gauge control box, etc. It is used when the pipeline pressure and water flow rate are insufficient.